Camera Connection and Recommendations.

• Camera Connection:

Insta360 One X2

There are two ways to connect with the Insta360 One X2:

1. The automatic way.
2. The manual way.

If the automatic way does not work, please follow the manual one.

 

The automatic way:

1. Power On the camera by pressing the power button.
2. When you want to take a panorama, you will be prompted to choose the camera.
3. Tap Insta360.
4. Press OK to allow the app to use the Bluetooth.
5. It will search for the camera and connect to it automatically.

The manual way:

1. Power On the camera by pressing the power button.
2. On your iPhone, go to the settings and make sure that the Wifi is on.
3. Search for the camera Wi-Fi network and tap it. It should have a name like ”ONE X2 OSC”.
4. Enter the password of the network which is by default “88888888”.

 

Note:

Make sure your camera is always updated through its own application.

Insta360 App link

Android Camera App

IOS Camera App

 

How to make sure camera is updated?

1. – Turn on the camera.
2. – Open the application, then press the button that appears in the bottom center of the screen.
3. – Select and connect the camera.
4. – An automatic alert appears if there are any new updates.

 

Theta Z 1

1. On the camera, press the power button to start the camera.
2. Make sure that the camera’s Wi-Fi is on. If not press the Wi-Fi & Bluetooth button.
3. Make sure that the camera is in photo mode. If not press the mode button.
4. On your iPhone, go to the settings and make sure that the Wi-Fi is on.
5. Search for the camera Wi-Fi network and tap it. It should have a name like ”THETAXS12345678.OSC” which consist of “THETA” followed by the camera serial number.
6. Enter the password of the network which is the serial number without the letters and the dot.